Clone this wiki locally
Allows selection of different formats of the date line in idle screen. "Alt. format" shows the last destination id used in voice packets. "!" shows it was silent, not on speaker because id was not in rxlist
Allows listening to voice calls not in the rxlist.
Enables unstable, and otherwise unfinished features. This setting is reset every time the handset is turned on.
Enables output on the USB port. Consumes extra CPU power and thus battery charge.
Also enables system parts, that only produce output on the USB port.
Netmon / DevOnly!! (highly volatile, check back often for changes)
Enables console style information screens, with internals from the handset. Controllable via hotkeys. Not always the same on each release.
3 copy last received TG
Copies received TG (visible in Alt. format statusline) to the current TX TG. Allows any TG received during promiscuous mode to be temporary copied to the current contact. The copied TG persists, until the channel or zone is changed.
5 clear syslog
Clears syslog screen (netmon 3)
6 send syslog to USB
If USB logging is enabled, this will send syslog to dmesg (receivable via md380-tool dmesgtail)
7 show normal screen
Show normal idle screen. Also resets QSO popup. To allow menu access during QSO.
8 show screen 1
Show netmon screen 1
9 show screen 2
Show netmon screen 2
(#) show screen 3
Show netmon screen 3. A list of radiopackets decoded:
- cs G 2046058->204 (= start of group call from 2046058 to 204)
- ce G 2046058->204 (= end of group call from 2046058 to 204)
- dh U 2043042->5057 (= datamessage from 2043042 to user 5057, which is the APRS gateway)
- 1 Member
- 4 Topics, Last Post:
- Started on
- This is a subgroup of DMR-Ontario.
- All subscribers can post to the group.
- Posts to this group do not require approval from the moderators.
- Messages are set to reply to group.
- Subscriptions to this group do not require approval from the moderators.
- Archives are visible to anyone.
- Wiki is visible to subscribers only.
- Members can edit their posts.
- Members can set their subscriptions to no email.